TSOR

tsor

TSOR 1200

The most efficient combination of machines for the PVC mixing and preparation for the extrusion line. The different sizes of these models make possible to start from a Turbomixer of 10 Liters to a High Efficiency Horizontal Cooler of 7500 Liters. The output rhythm is the highest of all these various systems. This choice demands that the used materials, the mechanical and electrical solutions, together with the instrumentation should be the best and most suitable to the customers’ needs and requests.

Data sheet

Model Total Capacity LtRigid PVC Kg/hrPlasticized PVC Kg/hr
TSOR 200/600200from 425 to 680 from 340 to 510
TSOR 300/1000300from 640 to 1020 from 510 to 765
TSOR 400/1200 400from 850 to 1360 from 680 to 1020
TSOR 500/1500 500from 1060 to 1700 from 850 to 1275
TSOR 600/1800 600from 1275 to 2040 from 1020 to 1530
TSOR 700/2100 700from 1485 to 2380 from 1190 to 1785
TSOR 800/2500 800from 1700 to 2720 from 1360 to 2040
TSOR 1000/2500 1000from 2125 to 3400 from 1700 to 2550
TSOR 1200/3500 1200from 2550 to 4080 from 2040 to 3060
TSOR 1500/4500 1500from 3185 to 5100 from 2550 to 3825
TSOR 2000/6000 2000from 4250 to 6800 from 3400 to 5100
TSOR 2500/75002500from 5310 to 8500from 4250 to 6375

NOTE:
The data are merely indicative and must be confirmed by VALTORTA, case by case. Valid for a fully-automated feeding system and with the availability of a sufficient cold water mass flow at a temperature not higher than 15°C.

Contact us

Write us for a custom consultancy
or to ask info

OR CALL US
+39 030 313190